Bitmap to Vector Conversion Software


Bitmaps can be easily converted to production-ready vector art work and exported in a variety of file formats.

New Sports, School, and Mascot Graphics


Versatile graphics for heat press vinyl, screen printing, digital printing, embroidery, applique, and laser engraving.




Knowledgebase Home | Glossary | Favorites | Login Knowledgebase Home | Glossary | Favorites | Login
Search the Knowledgebase Browse by Category
Setting axis for Roland GX-24 cutter
Article Details

Last Updated
18th of August, 2015

User Opinions (1 vote)
100% thumbs up 0% thumbs down

How would you rate this answer?
Helpful
Not helpful
Setting up the Roland GX-24 for Axis Swap
By default, the new Roland GX-24 plotter is setup for cutting from left to right, rather than
cutting tdown the length of the roll. Most sign specific software, such as SignLab, FlexiSign,
and ProDeSIGN expects the orientation to run the length of the roll. Roland calls this Rotate
0 or Rotate 90.
To change the default, follow these instructions:
Load material in the machine.(the display will say SETUP SHEET , and ROLL
Press ENTER
(Note that the cutting head will stop on the left hand side of the machine.)
Press MENU button twice
Press DOWN ARROW once (the top of the display says CONDITION)
Press the RIGHT ARROW once (the top of the display says FORCE)
Press the UP ARROW twice (the top of the display says ROTATE)
Press the RIGHT ARROW once (the bottom of the display says 0 deg)
Press the DOWN ARROW once (the bottom of the display says 90 deg)
Press ENTER
Press the MENU button twice (the top of the display says UNSETUP)
Press ENTER (the display says SELECT SHEET >ROLL)
Press ENTER
( Note that the head will now scan the size of the vinyl and stop on the right side of the material.)
Setting up the Roland GX-24 for Axis Swap

 
By default, the new Roland GX-24 plotter is setup for cutting from left to right, rather than
cutting tdown the length of the roll. Roland calls this Rotate 0 or Rotate 90.
 
To change the default, follow these instructions:
 
  1. Load material in the machine.(the display will say SETUP SHEET , and ROLL
  2. Press ENTER (Note that the cutting head will stop on the left hand side of the machine.)
  3. Press MENU button twice
  4. Press DOWN ARROW once (the top of the display says CONDITION)
  5. Press the RIGHT ARROW once (the top of the display says FORCE)
  6. Press the UP ARROW twice (the top of the display says ROTATE)
  7. Press the RIGHT ARROW once (the bottom of the display says 0 deg)
  8. Press the DOWN ARROW once (the bottom of the display says 90 deg)
  9. Press ENTER
  10. Press the MENU button twice (the top of the display says UNSETUP)
  11. Press ENTER (the display says SELECT SHEET >ROLL)
  12. Press ENTER(Note that the head will now scan the size of the vinyl and stop on the right side of the material.)
Visitor Comments
No visitor comments posted. Post a comment
Post Comment for "Setting axis for Roland GX-24 cutter"
To post a comment for this article, simply complete the form below. Fields marked with an asterisk are required.
   Your Name:
   Email Address:
* Your Comment:
* Enter the code below:
 
Related Articles
No related articles were found.
Attachments
No attachments were found.

Continue